Back to work September 11, 2020 16:32
I've been trying to consolidate all of the different things I do, from art to teaching classes in magic to growing plants to writing books. So I'm going to be posting here again instead of on Wordpress. Trying to keep everything closer to home and decrease the craziness.
In terms of painting, I finally started exploring the watercolor ground I've had for the past couple of years. I applied some QoR Cold Press watercolor ground to a couple of small canvases I got from Blick to do oil experiments with. That was a year ago, and I didn't accomplish much with those experiments, but I found the unused canvases when I moved and sorted all my supports out so everything is in one place and I can find stuff.
I haven't been using my oils since I moved out of my studio back in I think it was November. It was just not an okay place for a studio. Maybe great for a sawmill, due to the noise, dust, flooding, and old lead paint falling out of the ceiling, but not for a painter. But once I was out of there, I didn't feel okay about using oils in my loft. It wasn't that I was using any solvents or other toxic stuff; I use just walnut oil with an occasional foray into walnut oil + alkyd. But the smell of oxidizing vegetable oil is not that pleasant and also I have cats. And cat hair and oil paints don't mix.
So I've been using my watercolors instead, and honestly although I do miss oils and want to get back to them eventually (I would like to move to a 1-2 BR apartment in a more convenient location in spring), I am really enjoying the challenge of watercolors. I forgot how much I love Daniel Smith's Primatek Colors (made out of rocks!) and all sorts of granulating pigments.
But I've also been missing the easy framing of an oil painting. For instance, my loft is plastered with many of my oil (and acrylic paintings), which can be hung without framing--just throw a wire on the back. I haven't even varnished most of them.
But watercolors are another story. NONE of them are hanging on the walls because of the cost of framing them and because, frankly, I don't like framing behind glass. It is heavy and expensive and just aesthetically not the best, IMO.
So I've explored ways to seal watercolor paintings. One of them is just to spray them with acrylic + mineral spirits spray varnish. It works great but holy hell does it STINK. You HAVE to do it outside, even in the depths of winter, and it is, just as it smells, carcinogenic. No thank you cancer.
So instead, what I've been doing on and off with the watercolors is sealing them with Dorland's Cold Wax. This gives the colors a depth and richness plus protects the work from water. I use three coats, letting it dry thoroughly between each coat and then buffing with a soft cloth. It makes a nice satin sheen, really wonderful and not at all plasticky, like the spray varnishes can be. I have seen videos of people applying it with their fingers, but it does contain odorless mineral spirits (almost no smell), so I would not get this on my skin. I use a soft rag or a shop cloth to apply it. You can actually splash water on the thing when you are done and it will just bead up. You can pop your work into a regular frame with a foam backing and you are good to go.
However, this does mean that some competitions will not allow you to enter your work as a watercolor. Instead, you enter it as "mixed media." That is fine with me. I have found that collectors do not seem to give a damn about medium. :) And if one or two watercolor societies don't allow it, well, I don't need to be part of that.
I still felt a bit weird about framing a piece on paper and I know that many people like to get a painting all ready to hang and furthermore, they just don't like works on paper. To many, if it ain't on a canvas, it ain't art. So I decided I would try the watercolor ground on canvas.
It is fabulous. I am still experimenting with it, in particular in terms of achieving some kind of granulation. But it is fab for lifting. I do think it sucks up paint. But so far I have only tried the QoR watercolor ground and not all the other brands and types.
I was concerned because in the past I had tried it and the cold wax seemed to make any use of titanium a bit dingy. But now that does not seem to be an issue. Also, I have tried going over the titanium with a thin layer of zinc and I don't see any dingyness.
I've got tons of canvases and panels from my oil and acrylic painting days, and I am going to cover them all with watercolor ground.
Next up, using the cold wax to finish these things.
I did contact QoR to ask them about whether they thought cold wax would work on their light dimensional ground, which is some cool stuff. It looks like it has really unusual capabilities with respect to watercolor. I can hardly wait to experiment with that. But they seemed a bit doubtful that cold wax would work with that particular ground, because it is a bit spongy, but I am looking forward to giving it a try.
That said, you can do quite a bit of texture with the watercolor ground, as you can see from this photo of something I was messing around with.
And of course, once you are done painting, you can seal the paintings on watercolor ground other than the light weight stuff with cold wax, and you have a painting that is ready to hang. I love it!